Thermoplastic Fluorescent Pigment TDS
|
|
2023-12-22 11:14:10
| 来源：admin
|
|
Thermoplastic Fluorescent Pigment
1，VMN Type Fluorescent Pigment
|
Thermoplastic fluorescent pigment with brilliant colors and excellent light fastness. VMN-Type is similar to VC-Type in general properties with strong in color strength. It is used in mild solvent based system and water based system.
|
|
AVAILABLE COLORS
|
|
VM-311N
|
PINK
|
VM-316N
|
YELLOW
|
|
VM-312N
|
RED
|
VM-318N
|
GREEN
|
|
VM-313N
|
RED ORANGE
|
VM-319N
|
BLUE
|
|
VM-314N
|
ORANGE
|
VM-321N
|
MAGENTA
|
|
VM-315N
|
YELLOW ORANGE
|
VM-322N
|
VIOLET
|
|
|
PHYSICAL PROPERTIES
|
|
Resin type: thermoplastic
Average particle sizes: 2.5~3.5 micrometer
Specific Weight: 1.34 density
Softening Point: 125°C
Decomposition Point: 200°C
|
|
Solvent Resistance
|
|
The VM-N series are substantially resistant to the following solvents and plasticizers:
|
|
AQUEOUS
|
|
KETONE
|
|
|
ALIPHATICS
|
|
HALOGENATED & MISC
|
|
|
AROMATICS
|
|
PLASYICIZERS
|
|
|
ALCOHOLS
|
|
ESTERS
|
|
|
GLYCOLS
|
|
|
|
Most solvents of the type listed may cause some degree of swelling of the pigment particles and for the reason, formulations containing them may increase in viscosity, to some extent on standing.
Mixtures of some solvents may have a more severe effect on VMN-pigments than the individual solvents alone. It will partially solvents the pigments and cause more severe swelling and bleed of the particles than the single solvents.
|
|
Applications
|
|
VM-N series are thermoplasic fluorescent pigments, with very fine particle sizes and bright colors than VC-series. They are applied in paper coating, textile printings, screen inks, gravure inks(water base),A-type-gravure inks etc.
|
|
Typical application are
|
|
Textile printings
Paper coating(water based)
Gravure inks(water based)
Screen inks(water based)
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
2，VC Type Fluorescent Pigment
|
Typical of thermoplastic fluorescent Pigment with extremely bright colors. It is used in general properties of water based system and weak solvent based system
|
|
AVAILABLE COLORS
|
|
VC-111
|
PINK
|
VC-117
|
LEMON YELLOW
|
|
VC-112
|
RED
|
VC-118
|
GREEN
|
|
VC-113
|
RED ORANGE
|
VC-119
|
BLUE
|
|
VC-114
|
ORANGE
|
VC-120
|
ROSE
|
|
VC-115
|
YELLOW ORANGE
|
VC-121
|
MAGENTA
|
|
VC-116
|
YELLOW
|
VC-122
|
VIOLET
|
|
|
PHYSICAL PROPERTIES
|
|
Resin type: thermoplastic
Average particle sizes: 2.5~3.5 micrometer
Specific Weight: 1.36 density
Softening Point: 120°C
Decomposition Point: 190°C
|
|
Solvent Resistance
|
|
The VC-series are substantially resistant to the following solvents and plasticizers:
|
|
AQUEOUS
|
|
KETONE
|
|
|
ALIPHATICS
|
|
HALOGENATED & MISC
|
|
|
AROMATICS
|
|
PLASYICIZERS
|
|
|
ALCOHOLS
|
|
ESTERS
|
|
|
GLYCOLS
|
|
|
|
Most solvents of the type listed may cause some degree of swelling of the pigment particles and for the reason, formulations containing them may increase in viscosity, to some extent on standing.
Mixtures of some solvents may have a more severe effect on VC-pigments than the individual solvents alone. It will partially solvate the pigments and cause more severe swelling and bleed of the particles than the single solvents.
|
|
Application
|
|
VC-series are thermoplasic fluorescent pigments with very fine particle sizes and Bright colors. They are applied in paper coating, textile printings, screen inks, gravure inks(water base)… ect.
|
|
Typical application are
|
|
Textile printings
Paper coating(water based)
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
3，HVP Type Fluorescent Pigment
|
The HVP- Type is good at heat stability, tinctorial strength and bright shade. It is free of formaldehyde. They are recommended for applications in plastics. With a larger particle size, it can reduce the dusting problem.
|
|
AVAILABLE COLORS
|
|
HVP-611
|
PINK
|
HVP-617
|
LEMON YELLOW
|
|
HVP-612
|
RED
|
HVP-618
|
GREEN
|
|
HVP-613
|
RED ORANGE
|
HVP-619
|
BLUE
|
|
HVP-614
|
ORANGE
|
HVP-621
|
MAGENTA
|
|
HVP-615
|
YELLOW ORANGE
|
HVP-622
|
VIOLET
|
|
HVP-616
|
YELLOW
|
|
|
|
|
PHYSICAL PROPERTIES
|
|
Minimum processing temperature:190 ˚C
Decomposition Point:250 ˚C
Softening point:150 ~ 160 ˚C
Specific weight:1.15 density
Grind:4.0 min hegman gage
Particle sizes:30 ~ 60 micrometer
|
|
Chemical Nature & Dispersion Properties
|
|
HVP-pigment is a Solid solution of fluorescent dyes in a thermoplastic polymer resin. To ensure complete development of the fluorescent color effect, the HVP-pigment must be completely melted and evenly distributed throughout the plastic system. The recommended minimum processing temperature is 190˚C.
|
|
Additives
|
|
Certain metal Ions and nucleated polymers are known to cause color changes and loss of brightness with fluorescent colorants. Studies have shown that plastic processing additives containing “free” zinc, magnesium, calcium and iron will cause deleterious color effects when used in conjunction with HVP-pigment. If a metal containing additive must be used ,it should be thoroughly tested to ensure the color stability of the HVP-pigment. Also, refer to Technical Bulletin ,”Effects of metal Ions on fluorescent colorants in plastic”
|
|
Applications
|
|
Polyethylene
Polyacrylic
PA (Nylon)
Polycarbonate
Polystyrene
|
Urethane
Polypropylene
Rigid PVC
Rigid PVC
|
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
4，VPF Type Fluorescent Pigment
|
The VPF-series pigments are based on a high heat-resistance thermoplastic resin matrix which is free of formaldehyde. This type has very fine particle size.
|
|
AVAILABLE COLORS
|
|
VPF-11
|
PINK
|
VPF-18
|
GREEN
|
|
VPF-12
|
RED
|
VPF-19
|
BLUE
|
|
VPF-13
|
RED ORANGE
|
VPF-21
|
MAGENTA
|
|
VPF-14
|
ORANGE
|
VPF-22
|
VIOLET
|
|
VPF-16
|
YELLOW
|
|
|
|
|
PHYSICAL PROPERTIES
|
|
Minimum processing temperature: 190℃
Decomposition Point: 250℃
Softening point: 150℃ ~ 160℃
Specific weight: 1.15 density
Particle sizes: 3 ~ 5 micrometer
|
|
Applications
|
|
Polyethylene
Polypropylene
Polystyrene
PA (Nylon)
Ionomer
|
Polycarbonate
Polyacrylic
Rigid PVC
Urethane
|
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
5，LVP Type Fluorescent Pigment
|
The LVP-Type has a low softening point(80˚C ~ 90˚C ). When the temperatures reaches 145˚C , the fluorescent powder will be melted in plastics well and show great color shade.
|
|
AVAILABLE COLORS
|
|
LVP-9011
|
PINK
|
LVP-9019
|
BLUE
|
|
LVP-9013
|
RED ORANGE
|
LVP-9021
|
MAGENTA
|
|
LVP-9014
|
ORANGE
|
LVP-9022
|
VIOLET
|
|
LVP-9016
|
YELLOW
|
|
|
|
|
PHYSICAL PROPERTIES
|
|
Minimum processing temperature：145 ˚C
Decomposition point：250 ˚C
Softening point： 85 ~ 95 ˚C
Specific weight：1.15 density
Particle sizes：30 ~ 60 micrometer
|
|
Chemical Nature & Dispersion Properties
|
|
LVP-pigment is a Solid solution of fluorescent dyes in a thermoplastic polymer resin. To ensure complete development of the fluorescent color effect, the LVP-pigment must be completely melted and evenly distributed throughout the plastic system. The recommended minimum processing temperature is 145˚C.
|
|
Additives
|
|
Certain metal Ions and nucleated polymers are known to cause color changes and loss of brightness with fluorescent colorants. Studies have shown that plastic processing additives containing “free” zinc, magnesium, calcium and iron will cause deleterious color effects when used in conjunction with LVP-pigment. If a metal containing additive must be used ,it should be thoroughly tested to ensure the color stability of the HVP-pigment. Also, refer to Technical Bulletin ,”Effects of metal Ions on fluorescent colorants in plastic”
|
|
Applications
|
|
Polyethylene
Polyacrylic
PA (Nylon)
ABS
Polycarbonate
|
Polystyrene
Urethane
Polypropylene
Rigid PVC
Ionomer
|
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
6，NP Type Fluorescent Pigment
|
NP-type is a pretty brightly colored and high color strength pigment. It’s properties include heat stability, easy dispersedness and high transparency.
|
|
AVAILABLE COLORS
|
|
NP-711
|
PINK
|
NP-718
|
GREEN
|
|
NP-716
|
YELLOW
|
NP-733A
|
LIGHT ORANGE
|
|
|
PHYSICAL PROPERTIES
|
|
Decomposition point: 180˚C
Softening point: 165˚C
Processing temperature 120˚C~180˚C
|
|
Application
|
|
NP-series can be used in plasticized PVC-formulation and withstand processing temperatures up to 180˚C for > 30 minutes.
|
|
Recommended Starting Formulatio
|
|
Flexible PVC Film / Two roll-mill 0.2m/ m thickness
PVC:100g
DOP: 38g
Epoxidized Soya Oil: 2g
Heat Stabilizer：2g
NP-Colorants：1g
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
7，NFH Type Fluorescent Pigment
|
NFH-Type is the latest innovation in liquid pigments. Besides, it contains no formaldehyde. It is made in very fine particles which yield exceptional light stability, heat stability, and chemical stability.
|
|
AVAILABLE COLORS
|
|
NF-11H
|
PINK
|
NF-12H
|
RED
|
|
NF-14H
|
ORANGE
|
NF-15H
|
YELLOW ORANGE
|
|
NF-16H
|
YELLOW
|
NF-17H
|
LEMON YELLOW
|
|
NF-19H
|
BLUE
|
NF-20H
|
ROSE
|
|
NF-21H
|
MAGENTA
|
NF-22H
|
VIOLET
|
|
|
PHYSICAL PROPERTIES
|
|
Resin type：thermoplastic
Average particle sizes: >0.2 micrometer
Percent Solids: 45%~48%
Specific Gravity: 1.02
Softening Point: >220°C
Glass transition temperature: 113 °C
Decomposition Point: 300°C
|
|
Applications
|
|
NFH-series contain no formaldehyde. It made from very fine particles which yield exceptional light stability , heat stability, and chemical stability. When it is used in textile products , it provides outstanding anti-washing capability. Further more ,the particle quality enable this type of pigment to have extensive uses.
|
|
Typical application are
|
|
Paints/Coatings(water based)
Flexographic inks(water based)
Gravure inks(water based)
Screen inks(water based)
Textile printings inks
Paper coating(water based)
|
|
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
8，NF Type Fluorescent Pigment
|
NF Fluorescent Pigments are the most recent innovation in liquid pigment.It completely overcome the disadvantage of dust pollution from powdered pigment.The pigment is not classified in the Colour Index.
|
|
AVAILABLE COLORS
|
|
NF-11
|
PINK
|
NF-12
|
RED
|
|
NF-14
|
ORANGE
|
NF-16
|
YELLOW
|
|
NF-17
|
LEMON YELLOW
|
NF-18
|
GREEN
|
|
NF-19
|
BLUE
|
NF-20
|
ROSE
|
|
NF-21
|
MAGENTA
|
|
|
|
|
PHYSICAL PROPERTIES
|
|
Resin type：thermoplastic
Average particle sizes：>0.2 microns
Specific Gravity：1.02
Softening Point ：>220°C
Glass transition temperature ：113 °C
Decomposition Point ：300°C
|
|
Applications
|
|
NF-series contain no formaldehyde. It made from very fine particles which yield exceptional light stability , heat stability, and chemical stability.When it is used in textile products , it provides outstanding anti-washing capability. Further more ,the particle quality enable this type of pigment to have extensive uses.
|
|
Typical application are
|
|
Paints/Coatings(water based)
Flexographic inks(water based)
Gravure inks(water based)
Screen inks(water based)
Textile printings inks
Paper coating(water based)
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
9，FK Type Fluorescent Pigment
|
The liquid pigment is developed for all type of inks. FK-Type owns bright color shade, heat stability, light stability, and chemical stability without formaldehyde.
|
|
|
|
AVAILABLE COLORS
|
|
FK-11
|
PINK
|
FK-18
|
GREEN
|
|
FK-12
|
RED
|
FK-19
|
BLUE
|
|
FK-15
|
YELLOW ORANGE
|
FK-21
|
MAGENTA
|
|
FK-17
|
LEMON YELLOW
|
|
|
|
|
|
|
PHYSICAL PROPERTIES
|
|
Resin type: thermoplastic
Average particle sizes: <0.2 micrometer
Specific Gravity: 1.02
Softening Point: >220°C
Glass transition temperature: 113 °C
Decomposition Point: 200°C
|
|
Applications
|
|
FK-series contain no formaldehyde. It made from very fine particles which yield exceptional light stability , heat stability, and chemical stability. When it is used in textile products , it provides outstanding anti-washing capability. Further more ,the particle quality enable this type of pigment to have extensive uses.
|
|
|
|
Typical application are
|
|
Mark pen inks
Ink-jet inks base
Paints/Coatings(water based)
Flexographic inks(water based)
Gravure inks(water based)
Screen inks(water based)
Textile printings inks
Paper coating(water based)
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
10，NT Type Fluorescent Pigment
|
Thermoplastic fluorescent pigment. It will be the kind of toner that can completely dissolve in solvent with high transparency property. It can be used in flexible packaging papers, films, and foils, and UV-cure inks.
|
|
AVAILABLE COLORS
|
|
NT-11A
|
PINK
|
NT-12
|
RED
|
|
NT-13
|
RED ORANGE
|
NT-14
|
ORANGE
|
|
NT-15
|
YELLOW ORANGE
|
NT-16
|
YELLOW
|
|
NT-17
|
LEMON YELLOW
|
NT-18
|
GREEN
|
|
NT-20
|
ROSE
|
NT-21
|
MAGENTA
|
|
NT-22
|
VIOLET
|
|
|
|
|
PHYSICAL PROPERTIES
|
|
Resin type:thermoplastic
Decomposition point:185˚C
Softening point:85 ~ 95 ˚C
Specific weight:1.36 micrometer
Particle sizes:Random Particles
|
|
Chemical Nature & Dispersion Properties
|
|
NT-pigment is a Solid solution of fluorescent dyes in a thermoplastic polymer resin. To ensure complete development of the fluorescent color effect, the pigment must be completely dissolve throughout the solvent system.
|
|
|
|
※ These data were obtained by testing according to our methods, with any necessary test deviations. Other test methods may give different results.
|
